Wear Resistant Fluorinated Diamondlike Carbon Films

        Fluorinated diamondlike carbon (FDLC) films have been deposited on Si wafers by RF plasma assisted chemical vapor deposition, under a variety of conditions. The films have been characterized by FTIR and index of refraction measurements, RBS and FRES analysis for determination of film composition, and stress measurements from the bending of the wafers by the deposited films. Friction and wear measurements have been performed using pin-on-flat and pin-on-disk testers in ambient air, at maximum Hertzian contact pressures ranging from 320 to 1100 MPa. By adjusting the deposition parameters, the properties of the FDLC films could be changed from soft films, with no significant wear resistance, to films containing more than 20% F and having wear resistance comparable to unfluorinated DLC. The tribological properties of the FDLC films are discussed in relation to their physical properties, as determined by the deposition conditions.

By: C. Donnet (Lab. de Tribologie et Dynamique des Systemes, France), J. Fontaine (Lab. de Tribologie et Dynamique des Systemes, France), A. Grill, V. Patel and M. Belin

Published in: RC20737 in 1997

This Research Report is not available electronically. Please request a copy from the contact listed below. IBM employees should contact ITIRC for a copy.

Questions about this service can be mailed to reports@us.ibm.com .